-nbsp;If you'd rather record your message and put it into something of your own, this is the perfect choice. After recording, put it into dolls, pillows, plush and more.-nbsp;-nbsp;

Component:-nbsp;plastic case,-nbsp;2 buttons,-nbsp;a-nbsp;speaker,-nbsp;MIC,-nbsp;LED-nbsp;indicator-nbsp;and-nbsp;batteries

Dimension:-nbsp;1 3/4-quot; diameter x 3/4-quot; high (D45mm x H19mm) Packing:-nbsp;

1pc/ blister, 40pcs/inner box, 600pcs/ctn.

Carton size: 420 x 360 x 350mm

GW: 22kg

Detailed Product Description
Talking photo
Operation guide:
Operator can record her own voice message by pressing REC button. Then touch the
glass to listen the recorded message. The retention of recorded message could be
up to 50 years even change batteries.
Features:
1) Voice duration: 10-second and 20-second
2) GR520 is for holding 4" x 6" (10 x 15cm) picture
3) Component: leather photo frame, electronic elements and batteries.
4) The frame is replaceable and customized.
 

Recordable album
Holds 24 photos.
Product Dimension: L19.5 x W14.2 x H1.57" (495 x 360 x40mm)
in order to hold A3 picture L16.5 x 11.7" (420 x 297mm)
Leatheroid is used for the cover and back cover.
Powered by 2 AAA batteries.
Flash memory preserves even when changing batteries.
Recording Duration: 10s for each button, total 240s
24pcs buttons,1pcs REC, 1pcs LED, 1pcs Reset are on
plastic case surface. Refer to the sample TERS provided
and below pictures.
On-Off switch beside the case.
One full set stickers with yellow numbers(from 1 to 24)
printed will be packed in the PP bag separately.
No need stick on the pocket.
 

Lovely and easy learning education instrument
1) 16 inner pages and 2 covers
2) 630 seconds music and message are divided into 16 paragraphs in order to match each inner page topic.
3) Push each of 16 active buttons on voice pat to play one individual message
4) Dimension: 280 x 260 x13mm
5) Match EN71 and ASTM standard as well as CE request.
6) Use 2 AAA batteries
7) In Hebrew language

Please contact below person for distribution and retail.

Attn: Amit Sofer
JEP - Educational Products
Add: 20 SHLOMTZION ST. MODIIN 71700, Israel
Tel: +972-54-4440240
Fax: + 972-77-2080281
E-mail: amit.sofer@gmail.com

• Records baby's valuable voice and moment.
• Preserve classmates' greeting for years and recall the interesting when in schoolyard.
• Treasure and keep loving affairs and sugarplum for ever.
• A good teacher for children before school. Help them learn language easy by voice teaching and picture impression.
1) Record your voice on all pages or only several pages
2) 10 seconds duration for each page
3) Holds 24 photos.
4) Dimension: 144 x 197 x 31mm for
     holding 4" x 6" (100 x 150mm) pictures
5) Leatheroid is used for the cover and back cover.
6) Powered by 2 AAA batteries.
7) Flash memory preserves even when changing batteries.

1. Support MP3 and WMA sound formats
2. Sound memory capacity: Inside case and can not be replaced. 256MB/512MB/1GB/2GB（Sample capacity is 256MB）
3. 8 sound buttons, 2 volume controlling buttons, STOP button on front.
4. DC socket, External speaker socket, USB or audio input socket and On/Off switch beside case. Can download new message from computer via USB connecter. No need driver.
5. Inner speaker output: 2.0W (4hm, DC6v);
External speaker output: -gt;2.0W (4hm,DC6-12v)
6. 2.4Ghz RF transmitting and receiving.
7. Transmitting distance: up to 100m without obstruction between caller and remote controller.
8. Power supply: 4pcs AAA batteries (rechargeable AAA batteries recommended) /12VDC
9. Sensitivity for receiving: -lt;103dbm
10. Dimension: caller (178 x 82 x 70mm); controller (117 x 85 x 25mm)

For distributor and retailer, please contact with

Contact: Brians Supplies
Company: LR Active Ltd
Address: The Derries, Ballykeeran, Athlone, Co Westmeath Ireland
Tel/Fax:+353-90-6491966
Mob:+353-87-6347245
Email: Info@LRActive ; brian@LRActive.com-nbsp;-nbsp;-nbsp;-nbsp;-nbsp;-nbsp;-nbsp;-nbsp;-nbsp;
www.loughreeactive.net

1) A gift with love 
2) Voice duration: 10 seconds 
3) There is no music included before recording.
4) Component: Plastic Rose, Voice chip, speaker, MIC,
   Buttons and Battery.
5) Color of rose is optional. 3000pcs for each color.
6) 32pcs/color box, 128pcs/CTN, 65204pcs/container
7) Carton Size: 38×25×54CM
8) GW: 6kg/CTN.  
   (8.5kg/CTN for air transportation as it is light goods).

This series could be OEM or ODM design includes the customized appearance and sound
1) Music or voice will play once press the balloon weight.
2) Sound duration: 3-120s
3) Balloon Size: D45.7mm (18").
4) Balloon artwork can be customized.
5) Component: balloon, music device, 110mm ribbon.

 Lovely and easy learning education instrument
1) 16 inner pages and 2 covers
2) 630 seconds music and message are divided into 16 paragraphs in order to match each inner page topic.
3) Push each of 16 active buttons on voice pat to play one individual message
4) Dimension: 280 x 260 x13mm
5) Match EN71 and ASTM standard as well as CE request.
6) Use 2 AAA batteries
7) In Hebrew language

This item is suitable for advertising, door bell and promotion activities. The recorded message will play once someone passes through.
1) Component: plastic case, a speaker, MIC, LED indicator, motion sensor and 3 AA batteries
2) Voice duration: GR426-1 is 10 seconds and GR426-2 is 20 seconds duration. GR426-3 is 30 seconds duration.
3) Sensing distance: 1M-3M
4) Dimension: L96 x W62x H26mm
5) Standby current < 20uA

1) 10 seconds duration for each button. Total is 240s.
2) Product Dimension: L12.4 x W2.3 x H0.56" (314 x 58 x 14mm)
3) Powered by 2 AAA batteries.
4) Flash memory preserves even when changing batteries.
5) 24pcs buttons,1pcs REC, 1pcs LED, 1pcs Reset are on plastic case surface.
6) On-Off switch beside the case.
Operating Guide:
1) Load 2pcs AAA batteries；
2) Slide On-Off switch to ON position
3) Press and hold REC and number button together to record message.
4) LED is on
5) Speak to MIC till LED is off. Means 10s recording duration on this button is full.
6) Release REC and number button；
7) Press number button only to play the recorded message.
8) Press down RESET button with a pen-point when meet problem.

Features:
1) A special gift of love  ;
2) Music starts once press button
3) Component: Plastic Rose, Music chip, Speaker, MIC and a battery.
4) Music list: “Happy birthday to you”, “Merry Christmas”, “ Jingle bell” ;
5) Or customized message 6-30s
Operating:
1--Take off the battery insulation.
2--Pre-recorded message will be played immediately once push the PLAY button on handle.
3--Insert the battery insulation between battery and bracket again if don't use this box for long time.

Receiver Features:Can download new message from computer to the Sound Card by a professional writer.
1. Sound Card: 256MB replaceable SD card. Support MP3 and WMA sound formats.
2. 5 sound buttons, 2 volume controlling buttons, STOP button on front.
3. DC socket, External speaker socket, On/Off switch beside case.
4. Inner speaker output: 2.0W (4hm, DC6v);  External speaker output: 6.0W (4hm,DC6-12v)
5. 2.4Ghz RF transmitting and receiving.Dimension: 170 x 60 x 51mm (caller).
6. Transmitting distance: up to 100m without obstruction between caller and remote controller.
7. Power supply: 4pcs AAA batteries/12VDC. Rechargeable is recommended.
8. Sensitivity for receiving: <103dbm
Controller Features:
1) 5 sound buttons, 2 volume controlling buttons. STOP button on front.
Or we will make STOP button to share volume reduce button ▽.
2) Press and hold ▽ for 3 seconds to stop the sound.
3) RF transmitting signal;Dimension:  85 x 57 x 25mm.
4) Internal antennal can be extended from a plastic holder.Power supply: 2pcs AAA batteries.
5) Transmitting distance: Up to 100m without obstruction between caller and controller.
 

Receiver Features:
1. Support MP3 and WMA sound formats
2. Sound memory capacity: Inside case and can not be replaced. 256MB/512MB/1GB/2GB（Sample capacity is 256MB）
3. 8 sound buttons, 2 volume controlling buttons, STOP button on front.
4. DC socket, External speaker socket, USB or audio input socket and On/Off switch beside case. Can download new message from computer via USB connecter. No need driver.
5. Inner speaker output: 2.0W (4hm, DC6v);  External speaker output: >2.0W (4hm,DC6-12v)
6. 2.4Ghz RF transmitting and receiving.
7. Transmitting distance: up to 100m without obstruction between caller and remote controller.
8. Power supply: 4pcs AAA batteries (rechargeable AAA batteries recommended) /12VDC
9. Sensitivity for receiving: <103dbm
10. Dimension: caller (178 x 82 x 70mm); controller (117 x 85 x 25mm)
Controller Features:
1) 8 sound buttons, 2 volume controlling buttons. STOP button on front.
Or we will make STOP button to share volume reduce button ▽.
2) Press and hold ▽ for 3 seconds to stop the sound.
3) RF transmitting signal
4) Internal antennal can be extended from a plastic holder.
5) Transmitting distance: Up to 100m without obstruction between caller and controller.
6) Power supply: 2pcs AAA batteries.
7) Dimension: not be finalized so far.

The goal of musical football trumpt is for football match promotion. There are two pre-recorded songs. Once press the PLAY button, the relative song will be activation. Meanwhile blow the end for gernal trumpt sound. The bigger trumpt body is luminous when in dark.
1) Pre-recorded Song: 20-60 seconds for each button
2) Push Button
3) Insulation Tap
4) Life Cycle of battery: 600 times for 30s,-nbsp;-nbsp; 200 times for 120s.
5) Standby Current: Less than 5uA
6) Use 2pcs AAA batteries.
7) Dimension: 200 x 89mm
8) Football Symbol: D72mm

-nbsp;

A good quality music is pre-record. Touching the screen to activate the pre-recorded music.
1) Voice duration: 30s~240s
2) GV520 (174 x 225 x12mm) if for holding 4” x 6” (10 x 15cm) picture
3) Music or Song is optional. Danny Boy; My Heart Will Go On; Silent Night, Valentine Song; Garfield Birthday Song, other music and Songs.
4) Component: Wood photo frame, electronic elements, batteries and bracket.
5) Touch the screen to get the pre-recorded message.
6) The frame is replaceable (made of Poly, Wood or leatheriod).
Operation:
1--Load 2pcs AAA batteries.
2--Slide the power switch to be ON position.
3--Pre-recorded message will be played immediately when touch the screen.
4--Touch again the screen to stop the message.
5--Slide the power switch to be OFF position if don't use this box for long time.

This fun, Interactive Talking Map, with more than 500 facts and questions about the continents, the oceans and 72 animals of the world. It is an educational toy for the whole family. A friendly voice guides the child during each activity, explaining each part of the map and asking questions about it. The Quiz activities enable children to test its knowledge, The game congratulates children for each correct answer.
1) Hung on the wall, or spread out on a solid, clean horizontal surface or used on the floor for interacting learning.
2) It operates on touch screen technology by fingers or other soft and round objects.
3) Interactive elements on the map: 72 animals, 6 continents, and 6 oceans.
4) 5 categories: the sounds animal make, animal's family or class, animal's natural habitat, animal's diet, and An original fun fact about it.
5) 3 modes for playing: Discover, Quiz and Super Quiz. 
6) Repeat function.
7) 3pcs AAA batteries included. 
8) Suggest to specific ages (3-8 years old).
9) Dimension: 710 x 520 x 40mm ;
10) Match EN71 and ASTM standard as well as CE request.
11) Possible for OEM language
 

Lovely and easy interactive learning education instrument. It is the most modern technology in the educational games' field.
1) It operates on touch screen technology.
2) It speaks the language of the child.
3) It speaks out sentences, makes questions and gives answers.
4) In cludes one 20 pages book of Colours and one 20 pages book of Shapes.
5) 3pcs AAA batteries included.
6) Copying and comprehension exercises.
7) Games.Suggest to specific ages (3-7 years old).
8) Dimension: 208 x 188 x14mm
9) Match EN71 and ASTM standard as well as CE request.
10) Possible for OEM language
Operating:
1--Push power button down which is located on the right upper side of book.
2--The touch pad is loacted on the right side of the electronic book.Place the first page of the paper book on the touch screen. It is recommended that each time only one page is placed on the touch screen.
3--Touch the wods and pictures on the right page or follow the instructions spoken by e-book.
4--Push power button again if no use.

This series could be OEM or ODM design includes the customized appearance and sound
1) Music or voice will play once press the balloon weight. 
2) Sound duration: 3-120s
3) Balloon Size: D45.7mm (18”). 
4) Balloon artwork can be customized.
5) Component: balloon, music device, 110mm ribbon.
Operation:
1)--Take off yellow adhesive tape on bak of piezo.
2)--Stick to the piezo to correct position on balloon surface.
3)--Use clear adhesive tape to lock the wire.
4)--Push the PLAY button in the middle of balloon weight to play the pre-recorded message.

The goal of musical flag is to football match promotion. There is pre-recorded song. Once press the PLAY button, the song will be activation. Meanwhile the flag pole and handle are luminous when in dark
1) Pre-recorded Song: 30-120 seconds ;
2) Push Button ;
3) Insulation Tap
4) Life Cycle of battery: 280 times for 30s,   70 times for 120s. 5) Standby Current: Less than 5uA
6) Use 3pcs 1.5v Cells ;
7) Flag Size: 200 x 140mm ;
8) Pole Size: D4mm x L178mm
9) Handle Size: L110 x W38mm ;
10) Football Symbol: D42mm

It can be stuck on book as a music or message pat
1)-nbsp; Push each of 16 active buttons on message pat to play one individual message
2)-nbsp; Dimension: 220 x 60 x13mm
3)-nbsp; On-Off switch beside
4)-nbsp; Voice duration: It will be decided by the customized sound file. As longer as-nbsp; the Buyer-rsquo;s need. For example 160s to 660s
5)-nbsp; Match EN71 and ASTM standard as well as CE request.
6)-nbsp; Use 2 AAA batteries
7)-nbsp; Component: plastic case, sound chip, PCB, speaker, sticker and batteries-nbsp;

Pen-nbsp; Reader pack includes a pen reader, books, USB cable, Charger, 11 books, Plastic Holder.
1) Has repeat, whole reading, spellling, translation, games,
MP3 and a story-in-one function.
2) Has a large capacity, can hold dozens of books,
USB high speed download books of data.
3) Voice is very clear.
4) Power supply: 3.7v, 320mAh Li Battery.
5) Suggest to specific ages (3-8 years old).
6) Pen dimension: 168 x 52 x 55mm.
-nbsp;-nbsp;-nbsp; Individual packing size: 35.5 x 38.8 x 6.5cm
7) Match EN71 and ASTM standard as well as CE request.
8) Possible for OEM language

MAX SPELL is the high-tech and supernatural educational toy which is combined with sound, light, electronic and blocks. It has got the international patent and intellectual property protection. Children can learn and remember the words in the block-building process under the voice guidance -amp; teaching. After a period of spelling study, test and entertainment on 10 categories of topics, such as letters, words and mathematics, children can master 1088 words and fundamental addition

It is suitable for children from age 3 to 6.-nbsp;

-nbsp;

l-nbsp; Start from letter study.

l-nbsp; Enlightenment with the children-rsquo;s growth phase

l-nbsp; Learning machine contains abundant teaching software with voice teaching, sound -amp; light guidance

l-nbsp; An innovative toy of intellectual development for early childhood

l-nbsp; An intelligent toy for preschool institutions and families

l-nbsp; A hot welcome toy in Europe and America

l-nbsp; The outside looks like the talking robots.

l-nbsp; Easy carry with

l-nbsp; Rich learning resources are offered by America preschool institutions.

l-nbsp; Enjoyable design for English letter learning. Learn not only letters but also natural science when play.

l-nbsp; Help your child stand out from others

l-nbsp; Simple operation (A. Teaching Mode; B. Examination Mode;C. Entertainment Mode)

l-nbsp; Three modes are guided by voice.

l-nbsp; Develop children-rsquo;s curiosity and exploration as well as study ability.

l-nbsp; No need parents' accompany.

l-nbsp; Learn when play.

l-nbsp; Children can develop more ways they prefer

Accessories

one learning machine

forty English letter blocks

fourteen mathematical operation blocks

one SD study card

three color cards for study guidance

one elegant bag for holding blocks

1) This device is suitable for dual tone music, chord music and other songs.
2) Activation: The pre-recorded message will be activated once card is opened.
3) Activation styles: There are two activation styles.
- One is pre-recorded message will be activated by pressing the PLAY button in right-down corner of the card for getting the pre-recorded message.
- The other one is the pre-recorded message will be activated once open the card (pull tab or light sensor).
4)-nbsp;Play song when card is opened
5) Component: Circuit Board, Voice chip, speaker, tongue tab switch, adhesive base and 3pcs batteries.
6) Dimension: 65 x 32 x 5mm
7) Duration: 3-60 seconds

-nbsp;

1) A lovely implement for birthday party

2) Activate styles: The music is activated by twisting the plastic handle.

3) Single Tone

4) Color at buyer's option

5) Size: D8 x H108 mm

6) Optional melodies: Happy Birthday; Merry Christmas; Love Story; Wedding March

7) Component: Candle, Melody or voice chip, speaker, MIC, Buttons and Battery.

Audio Player
I.Specification
1) 4 animal sounds are pre-recorded.
2) Remote controller with four keys.
3) Transmission frequency: 433MHz or 315MHz
4) Remote distance: Up to 100 meters (Line in sight).
   But the guarantee distance is 30 meters (Line in sight)
5) External audio socket.
6) LED Power indicator.
7) Signal Noise rate: ≥40dB
8) Outlook and Structure
Packing:
1pc/box, 40pcs/CTN
Carton Size: 520*235*525mm
GW: 16.0kg/CTN
 

1) 12-second voice recording and playback time
2) Sends your own voice message to friends
3) Message can be recorded many times over
4) Deletes previous voice by pressing REC button and recording over
5) Voice emitted when opening card or play button is pressed
Inner packing: 1pc/polybag + envelop
Outer packing: 450pcs/ctn
Carton dimensions: 62 x 42 x 36cm
 

1) This item is only suitable for playing single melodies (mono).
2) Application: assembled inside of greeting card or post card
3) This module plays melody when card is opened
4) Component: PCB, Voice chip, buzzer, tongue switch, LED and batteries
5)  Dimension: 60 x 30 x 5mm
6)  Duration: 3-30 seconds
7) Pre-recorded message will be activated once open the card.

1)  Sound Duration: 3s-120s ;
2)  Batteries are replaceable.
3)  3pcs 1.5volt cell batteries are required
4)  Dimension: 85 x54x5mm;
5)  ON-OFF switch beside
6)  Batteries are replaceable when draw out the battery housing.
7)  There is a metal clap on back. It is easy to be fixed on book, maggazine or other objects.

It is suitable for Talking Doll, Musical Gift, Sound Book and Voice Plush.
1)  Lifelike sounds or voice.
2)  The pre-recorded sound will be activated when squeeze the cover.
3)  Choose from various animal sounds, woman screaming, laughing ghost and music.
4)  Use three pieces AG13 button cells ;
5)  Size: D40 x L65 x H20mm (D1.57 x L2.56 x H0.88 inch)
6)  Remove insulation plastic tab for getting power supply  and to be activated immediately.
7)  Component: plastic box, sound chip, speaker and batteries ;
8)  Voice duration: 3-60s
9)  Battery Lifecycle: 1000~50 times according to different sound suration.

1) Play voice while pressing the PLAY button. 
2) Voice duration: 3~60 seconds
3) Application: Fur toy\A work of art\Gift ;
4) Dimension: L96×W62×H26mm
5) Use 3pcs   AA batteries;
6) ON-OFF switch;
7) Component: plastic case, sound chip and speaker.

1) Play voice while pressing PLAY button ;
2) Voice duration: 3~120 seconds
3) Application: Fur toy\A work of art\Gift ;
4) Dimension: L65× W43× H31mm
5) Use 2pcs  AAA batteries.
6) On/Off switch
7) Component: plastic case, sound chip, PCB, speaker and 2pcs AAA batteries.

1) Application: assembled inside of toy and gift ;
2) Voice duration: 3~60 seconds;
3) Dimension: D30 x H13 mm ;
4) Component:  plastic box, music chip, circuit board, speaker and AG10 batteries

1)  Application: assembled inside of toy and gift ;
2)  Voice duration: 3~60 seconds
3)  Dimension: D30 x H10 mm ;
4)  Component:  plastic box, music chip, PCB, buzzer and 3x 1.5v batteries.

This item is suitable for door alarm advertising, doll part and promotion activities. The pre-recorded message will play once someone passes through in 3-10 meters range.
1) Voice duration: 3~60 seconds ;
2) Sensor distance: 1m-3m
3) Dimension: L67 x W50x H20mm  ;On/Off switch ;Power Supply: 3pcs of batteries
4) Component:  Speaker, Circuit board, Plastic Case, Voice Chip, Motion Sensor, Batteries
 

This item is suitable for advertising, doll part and promotion activities. The pre-recorded message will play once someone passes through.
1) Voice duration: 3~60 seconds ;
2) Sensing distance: 1M-3M ;
3) Dimension: L96 x W62x H26mm
4) Component:-nbsp;-nbsp; speaker, voice chip, plastic case, switch, PCB, sensor, batteries
5) On/OFF switch ;
6) Battery: 3pcs of AA 1.5VDC ;7) Standby current -lt; 20uA
-nbsp;

-nbsp;

Operator can insert his own picture in the pocket on back and write something on the front. Moreover he can record his own message then mail to his friend or family.
1) Voice Duration: 10 -30 seconds are available
2) Component: Paper Card, Foam Board, Voice Chip, Speaker, pocket and Battery.
3) Voice recording and playing ;
4) On-off switch beside the card.
5) Record up to 200 –300 times base on the battery storage and voice duration;
6) Dimension: L 155 x W 112 x T 5mm
Operating Guide:
1) Switch to ON;
2) Press and hold down REC button;
3) Speak to MIC;
4) Switch to OFF;
5) Press PLAY for playing message.

It is a recorder whose shape looks like a credit card. It can record message up to 240 seconds. It is mainly used for recording a story for Kid’s or record kid’s speaking. The recorded message can preserve over 50 years.
1) Recording Duration: 240s. There is also 45s advertising voice pre-recorded on this unit.
2) Activation: Light sensor and Push button combined.
3) 3pcs 1.5volt cells are required. Batteries are replaceable.
4) Dimension: 85 x54x5mm
5) A clip is assembled on back in order to clip the recorder on pocket or book cover. 6) ON-OFF power switch
Operating Guide:Take off the black light sensor cover, the 45s message will be played immediately.
1) Switch to "ON" position to clear the memory. The red LED light flashes when memory is cleaning. The LED light extinguishes once memory is cleaned up.
2) Press and hold "REC" button for recording.
3) Speak to MIC. The LED is on during the recording. When message is up to 240s, the LED light extinguishes automatically.  '
4) Switch to "OFF" position
5) Press "TRY ME" button for playing back the message recorded just now. Press “TRY ME” button again to stop the playing while message is playing.

You can record your voice then stick it to photo frame, refrigerator or wherever you want. It is very thin, only 5mm.
1) Component: plastic panel, 2 buttons, a speaker, MIC, LED indicator and batteries；
2) Dimension: 60 x 45 x 5mm
Operating Guide:
1) Using pin point to press down and hold [REC] button.
2) Speak to MIC as soon as LED is on
3) Release REC button once LED is off that means recording memory is full.4) Press Play button to get the recorded voice.

You can record your voice then attach it to photo frame, post card or whatever.It is very thin, only 5mm.
1) Component: plastic panel, 2 buttons, a speaker, MIC, LED indicator and batteries
2) Dimension: 80 x 55 x 5mm；
3) dobule adhesive tape on back.
Operating Guide:
1) Press down and hold [REC] button. 2) Speak to the recorder as soon as LED is on
3) Release REC button once LED is off that means recording memory is full.
4) Press Play button to get the recorded voice.

Features:You can record your voice and insert your picture into the card. Then mail to your family or friends.
1)Voice Duration: 10-second and 20s.
2)Component: Paper Card, Voice chip, Speaker, MIC, Buttons, foam and Battery.
3)Voice recording and playing
4)Record up to 150 –250 times base on the battery storage and voice duration
5) Dimension: L: 286 x W: 216mm in expandedness. And 143 x 216mm in fold.
Operating Guide:
1) Open the greeting card and slide the ON/OFF to On position.
2) Press down and hold [REC] button.
3) Speak to the card as soon as LED is on;
4) Release REC button once LED is off that means recording memory is full.
5) Slide the ON/OFF to OFF position.
6) Close the card and post it to your friend.                      
7) He will get your voice once push down the PLAY button.

1) It plays sound when the unit is put upside down or vibrated.
2) Choose from various animal sound, women screaming or laughing ghost
3) Duration: 3-60 seconds;
4) Dimension: D35×H33mm  ;
5) Application: for plush and dolls
6) Use 3pcs button cells

Musical Cap is a novel electronic consumption product. It is easy to be installed into bottle because it is very small and light.
1) The music will be played once opening the cap.
2) Various single melody or music can be recorded according to different demand
3) Application: wine and beverage bottle, gift packaging.
4) Melody duration: 10~60 seconds
5) Size: D28 x H38mm for aluminum cap to play single melody.
(customized dimension is welcome. But the Buyer need to provide 3pcs bottle samples).
6) Component: cell battery, aluminium bottle cap and sound device.

Musical Cap is a novel electronic consumption product. It is suitable for wine or perfume advertising and promotion.
1) The music will be played once opening the cap.
2) Various music or voice can be pre-recorded according to different demand.
3) Application: wine and beverage bottle, perfume bottle.
4) Music duration: 3~60 seconds
5) Size: D38 x H45mm for plastic cap to play chord music or voice.
(customized dimension is welcome. But the Buyer need to provide 3pcs bottle samples).
6) Component: cell battery, plastic bottle cap and sound device.

1) Case dimension: D65 x H12mm.
2) Speaker hole on front. ON-OFF switch, battery cover and
big bulgy PUSH on back. 
3) On-off Switch
4) Trigger mode: Trigger PUSH button (no need hold)
each time to play one cycle of music.
5) Slide On-off switch to be “OFF” position to shut off
the power. At OFF position, can not play any message even
trigger PUSH button.
6) Message: 6s-60s.
7) Power supply: 3pcs AG13 battereis. 3 x 1.5v=4.5v
8) Battery lifecycle: 400-500 times for 6s message; 40-50 times for 60s message.

1) This device is suitable for dual tone music, chord music and other songs (voice and music mixed).
2) Activation: The pre-recorded message will be activated once card is opened.
3) Activation styles: There are two activation styles.
- One is pre-recorded message will be activated by pressing the PLAY button in right-down corner of the card for getting the pre-recorded message.
- The other one is the pre-recorded message will be activated once open the card (pull tab or light sensor).
4) Greeting card musical modules play song when card is opened
5) Component: Circuit Board, Voice chip, speaker, tongue tab switch, adhesive base and 3pcs batteries.
6) Dimension: 65 x 32 x 5mm ;
7) Duration: 3-60 seconds

This device can play the dual tone music, chord music and other songs. Small and urgent quantity is suitable for this item.
1) Application: assembled inside of greeting card or post card
2) The pre-recorded message will be played when pull tab is pushed.
3) Component: Circuit Board, OTP Voice chip, speaker, tongue tab switch, adhesive base and cell batteries.
4) Activation: The pre-recorded message will be activated once card is opened (Pull Tab or Light Sensor) Or push PLAY button to play the pre-recorded message.
5) Dimension: 65 x 32 x 5mm ;
6) Duration: 10-60 seconds
 

Features:
1)  Dual Tone music or single melody  ;
2)  Color at buyer's option  ;
3)  Size: D39 x H42mm
4)  Optional melodies: Happy birthday; Merry Christmas; Love Story; Wedding March
5)  There is no human voice prerecorded.
6)  Component: Candle, Melody or voice chip, speaker, MIC, Buttons and Battery.
7)  Optional fragrance: Vanilla; Spicy; Rose; Mulberry; Dream
8)  The color of ivory, blue, green, wine and pink are available.

Features:
1) A lovely implement for birthday party
2) Activate styles: The music is activated by twisting the plastic handle.
3) Single Tone   ; 
4) Color at buyer's option  ; 
5) Size: D8 x H108 mm
6) Optional melodies: Happy Birthday; Merry Christmas; Love Story; Wedding March
7) Component: Candle, Melody or voice chip, speaker, MIC, Buttons and Battery.
Operating:
1--Take off the battery insulation tab.
2--Twist the plastic handle on bottom to play the music.
3--Light the candles on cake. 4--Back the battery insluation tab if don't use this box for long time.

1)  A good quality music is prerecord.
2) Music is activated by blaze or bright light
3) Life Cycle: Up to 90 hours. 
4) The diameter of candle is 4" (102mm)
5) Optional melodies: Danny Boy; My Heart Will Go On; Silent Night; Unchained Melody; You Light Up My Life or OEM music.
6) Optional fragrance: Vanilla; Spicy; Rose; Mulberry;
7) The color of ivory, blue, green, wine, pink even the craftwork design.
Operating:
1--Load 2pcs AAA batteries.
2--Light the candle to play the pre-recorded music.
3--Take out the batteries if don't use this box for long time.

Features:
1) Cartoon appearance ;
2) Clock, date and voice alarm function
3) Report corn value automatically while the corns dropping into
4) Report total value in pot when pushing button
Purpose: Bring happiness when kids save money

Features:The box works automatically when the engine turns on. To hear the duaa again, press the button
1) Dimension: L101.6 x W76 x D15.5mm ;  
2) 8 green LED lights around, 1 red LED lights in center.
3) Volume is controlled by a turning button.   
4) A hanging circle hole is located on the top of case.
5) 12VDC power socket is located at the bottom of body.  
6) Trigger button is in the center of body.
7) Getting power from car through a vehicle lighter plug and socket. Supply power to voice case through a common 12VDC plug + wire.
8) One piece of magnet is stuck on the back of body. One piece of iron with adhesive tape is put in packaging separately.
9) Voice duration: 60-second
Operating:
1--Connect the vehicle lighter plug to car power socket. 
2--Start the car.
3--Pre-recorded message will be played immediately. Meanwhile the middle red LED light will flahes and the 8 green LED lights will be always on.
4--Turn the volume switch beside to adjust the volume level.

Features:GV408 is mainly used for photographic activities. It can be used to bring animals closer for photographs. The caller is divided into two parts. Top part is the voice generating center. There is a speaker installed inside of top part. Bellow handle part is the operating center. The unit is small and easy to carry. It can be hung around the neck or fastened onto a belt. 8 animal sounds have been pre-recorded.
1．Volume Output： ≥ 100dB,(testing condition is far from 1M) ;
2．Volume Range： 0~100 dB                   
3．Power Supply； 3 x 1.5 AA (4.5 V DC)  ;
4．Max Operating Current： ≥ 200mA                                
5．Standby Current： ≤ 5mA ;
6．Signal to Noise： ≥ 40 dB    
7．Max Output Power： ≥ 800 mW
8．External speaker is available. 
9．Dimension: 140mm×65mm×39mm (5.5” x 2.56” x 15”)
10．Sounds are changeable.
Operating:
1--Load 3pcs AA batteries before use.
2--Turn the sound volume switch to available level.
3--Pre-recorded message will be played immediately when push any sound button. Meanwhile the red LED light will flahe.
4--Push another button to change the animal sound.
5--Take out the batteries if no use for long time.

Features:The SD Audio Player offer realistic and extensive library of premium animal sounds. By simply sliding different cards into the caller, you can access different, digitally mastered sounds.
1)  Component: Audio player, external horn, 3-meter cable and two SD cards.
2)  There are 4 animal sounds in one SD card. Total is 8 different animal sounds per-recorded.
3)  Use 4pcs AA batteries.External horn dimension: D102 x H76mm (D4” x H3”)
4)  Caller Dimension: 76 x 156 x 24mm (3” x 6.14” x 0.95”)
Operating:
1--Load 4pcs AA batteries before use.
2--Turn the sound volume switch to available level.
3--Pre-recorded message will be played immediately when push any sound button. Meanwhile the red LED light will flahe.
4--Push another button to change the animal sound.
5--Take out the batteries if no use for long time.        
 

Features:GV410 is mainly used for hunting activities. It can be used to bring animals closer for hunting. The caller has a remote controller.
1) 4 animal sounds are pre-recorded.
2) Remote controller with four keys.
3) Transmission frequency: 433MHz or 315MHz
4) Remote distance: Up to 100 meters (Line in sight). But the guarantee distance is 30 meters (Line in sight)
5) External audio socket.
6) LED Power indicator.
7) Signal Noise rate: ≥40dB 
8) Outlook and Structure.
Operating:
1)--Power on: Turn the volume switch clockwise to make LED Indicator on.
2)--Adjust the volume switch to select suitable sound volume.
3)--Activate the corresponding animal sound while pressing any button on remote unit.
4)--Re-press the button or press other buttons on Remote Unit to stop the sound playing immediately even if the sound hasn’t been finished one cycle.
5)--Battery replacement: remove the screws of battery door on the back of main unit and then replace batteries according to the polarities mark.
6)--Use 4 AA batteries.

Receiver Features:Can download new message from computer to the Sound Card by a professional writer.
1. Sound Card: 256MB replaceable SD card. Support MP3 and WMA sound formats.
2. 5 sound buttons, 2 volume controlling buttons, STOP button on front.
3. DC socket, External speaker socket, On/Off switch beside case.
4. Inner speaker output: 2.0W (4hm, DC6v); External speaker output: 6.0W (4hm,DC6-12v)
5. 2.4Ghz RF transmitting and receiving.
6. Transmitting distance: up to 100m without obstruction between caller and remote controller.
7. Power supply: 4pcs AAA batteries/12VDC. Rechargeable is recommended.
8. Sensitivity for receiving: <103dbm; 9. Dimension: 170 x 60 x 51mm (caller).
Controller Features:
1) 5 sound buttons, 2 volume controlling buttons. STOP button on front.
Or we will make STOP button to share volume reduce button ▽.
2) Press and hold ▽ for 3 seconds to stop the sound.3) RF transmitting signal
4) Internal antennal can be extended from a plastic holder.
5) Transmitting distance: Up to 100m without obstruction between caller and controller.
6) Power supply: 2pcs AAA batteries.
7) Dimension:  85 x 57 x 25mm.

1) Pre-recorded music or message will start once opening. Only playback function.
2) The optional music: You Light My Life, My Heart Will Go On, Wedding Match, Happy Birthday, Merry Christmas, Love Story, Valentine Song and other popular music.
3) Component: Excellent craft greeting card, Melody chip, speaker,foam board  and Batteries.
4) Life Cycle up to 300 times base on 10s duration.
5) Dimension: 130 x 130mm

1) Voice duration: 3 seconds to 60 seconds
2) Battery life cycle could be up to 500-100 times base on different duration.
3) Component: one paper card, sound module with speaker and battery.
4) The size and artwork are optional
5) OEM and ODM are welcome
6) Dimension: L 286 x W 210mm in flat (W210 x L148mm in folded). Or dimension could be optional.
7) Activation styles: There are two activation styles.
- One is pre-recorded message will be activated by pressing the PLAY button in right-down corner of the card for getting the pre-recorded message.
- The other one is the pre-recorded message will be activated once open the card (pull tab or light sensor).

It includes ond wireless pen reader, 18 pages cards, USB cable, 1 CD, 1 screwdriver, and Plastic Holder.
1) 2 in 1 – each Encyclopedia includes a bonus CD and an USB cable which connects to your PC!
2) Programs include Earth, Science, Mathematics and more!
3) Explore the various aspects of nature! Learn history, geography, the numbers, counting, the alphabet, season, and many more!
4) The console supports two players; playing quizes was never so much fun!
5) The digital counter shows you how much time is left, or how many answers have been asnwered correctly.
6) Voice is clear.
7) 4pcs AA batteries. 
8) can stand on the desk or hang on the wall
9) Suggest to specific ages (3-8 years old).
10) Pen dimention: Φ15 x 131mm.  Individual packing size: 31 x 51 x 9cm, actual weight is 2.0kg/pc.volumetric weight is 3.0kg/pc.
11) Match EN71 and ASTM standard as well as CE request.
12) Possible for OEM language

Lovely and easy learning education instrument. It is the most modern technology in the educational games' field.
1) It operates on touch screen technology. 2) It speaks the language of the child.
3) It speaks out sentences, makes questions and gives answers.
4) In cludes a 24 page book.
5) 3pcs AAA batteries included.
6) Complete alphabet A-Z (letter by letter).
7) Copying and comprehension exercises.
8) Letter games.Suggest to specific ages (3-7 years old).
9) Dimension: 208 x 188 x14mm
10) Match EN71 and ASTM standard as well as CE request.
11) Possible for OEM language
Operating:
1--Push power button down which is located on the right upper side of book.
2--The touch pad is loacted on the right side of the electronic book.Place the first page of the paper book on the touch screen. It is recommended that each time only one page is placed on the touch screen.
3--Touch the wods and pictures on the right page or follow the instructions spoken by e-book.
4--Push power button again if no use.

1) Voice duration: 3 seconds to 60 seconds;
2) Battery life cycle could be up to 300 times base on 10s duration
3) Component: cards, foam board, voice chip, circuit board with batteries and speaker
4) The size and artwork are optional;
5) OEM and ODM are welcome ;
6) Dimension: L150 x W100 x H5mm
7) The pre-recorded message will be activated by pressing the PLAY button in right-down corner of the card for getting the pre-recorded message.
Operation:
1--Slide the power switch to be ON position.
2--Push PLAY button to activate the pre-recorded message.
3--Put into the envelope then mail to your friend.
4--Slide the power switch to be OFF position if don't use for long time.

Features:
1) It has nine animal sounds ;
2) Nine animal icons are printed on surface.
3) Component: Foam Board, PV Print Cover, Speaker, 3 Button Batteries, Voice Chip and Circuit Bard.
4) Size: D100 x H 7mm;
5)-nbsp; Play animal sound while slightly pressing relative animal icon.

-nbsp;

Features:This item is suitable for advertising, doll part and promotion activities. The user can download the message from internet.-nbsp; Once someone passes through, the message will be played.
1) Support MP3 and WMA sound formats ;
2) Voice duration: 3~120 seconds
3) Sensing distance: 1M-3M-nbsp; ;
4) Dimension: L96 x W62x H26mm
5) Component:-nbsp;-nbsp; speaker, voice chip with 256MB capacity, plastic case, switch, PCB, motion sensor with expand cable, USB cable. ;
6) On/OFF switch-nbsp; ;
7) Battery: 3pcs of AA 1.5VDC (no include)
8) Standby current -lt; 20uA

-nbsp;

Features:This item is suitable for advertising and promotion activities. The pre-recorded message will play once someone passes through in 3 meters area.
1) Voice duration: 3~60 seconds-nbsp; ;
2) Sensing distance: 1M-3M-nbsp; ;
3) Dimension: D70 x H110mm
4) Component:-nbsp; speaker, voice chip, frog case, switch, PCB, sensor, batteries
5) Battery: 3pcs of AA 1.5VDC-nbsp; ;
6) Standby current -lt; 20uA

-nbsp;

Features:
It is suitable for Talking Doll, Musical Gift, Sound Book and Voice Plush.
1) Voice duration: 3~60 seconds ;
2) Lifelike voice or sounds
3) Sound will be played when squeeze the box.
4) Choose from various animal sounds, woman screaming, voice or laughing ghost
5) Use 3pcs AG13 button cells ;
6) Application for plush and dolls
7) Remove clear plastic tab for getting power supply and to be activated immediately.
8) Dimension: 45.5 x 38.5 x 21mm ;
9) Component: plastic box, sound chip, speaker and batteries.

-nbsp;

Features:
1)-nbsp; Application: assembled inside of toy and gift ;
2)-nbsp; Voice duration: 3~60 seconds ;
3)-nbsp; Dimension: D30 x H10 mm
4)-nbsp; Component:-nbsp; plastic box, music chip, PCB, buzzer and 3x 1.5v batteries.
5) Activation: The sound will start once the button pressed softly

-nbsp;

Features:
1) This device is suitable for dual tone music, chord music and other songs.
2) Component: Circuit Board, Voice chip, speaker, PLAY button, adhesive base and 3pcs batteries.
3) Smallest Dimension: D45 x 12mm in folded. L65 x W40 x H5mm in flat.
4) Duration: 3-60 seconds
5) The pre-recorded message will be activated once push the PLAY button

-nbsp;

Features:This player is a surprise gift for birthday, Valentine-rsquo;s Day, Christmas Day.
It can be stuck to various packaging boxes, wall, flowers, gift box and books.
The pre-recorded message will be played once push the PLAY button
1) 3-120 seconds duration is possible
2) Application for toy, gift packing case
3) Clear-amp; audible lifelike sound
4) Component: plastic case, a PCB, a speaker, a LED indicator and 4 batteries
5) Dimension:-nbsp; 67 x 52 x 7.1mm or 60 x 45 x 5mm or 86 x 54 x 5mm
6) The pre-recorded message could be optional. Music, song and voice are available.

-nbsp;

Features:This player is a surprise gift for birthday, Valentine-rsquo;s Day, Christmas Day.
It can be stuck to various packaging boxes, wall, flowers, gift box and books.
The pre-recorded message will be played once the packaging box cover is opened or light is suddenly turned on.
1) 3-120 seconds duration is possible
2) Application for toy, gift packing case
3) Clear-amp; audible lifelike sound
4) Component: plastic case, a PCB, a speaker, a LED indicator and 4 batteries
5) Dimension:-nbsp; 67 x 52 x 7.1mm or 60 x 45 x 5mm or 86 x 54 x 5mm
6) The pre-recorded message could be optional. Music, song and voice are available.

-nbsp;

Features:
Suitalbe for toy, plush or other children games.
1) Case dimension:D45 x H19mm.
2) Component: plastic case, sound chip, circuit board, batteries and speaker.
3) Message: 3~60 seconds.
4) Trigger mode: Trigger PUSH button (no need hold) each time-nbsp; to play one cycle of message.
5) Power supply: 3pcs AG13 battereis. 3 x 1.5v=4.5v
6) Battery lifecycle: 500 times for 3s message; 40-50 times for 60s message.

-nbsp;

Features:
1)-nbsp; A good quality music is prerecord.
2) Music is activated by blaze or bright light ;
3) The demension: D102 x H20mm
4) Optional melodies: Danny Boy; My Heart Will Go On; Silent Night; Unchained Melody; You Light Up My Life or OEM music. 30s - 300s are available.
5) The color of plastic case could be customized. The buyer has to provide the preferred color no# in Paton Color system.
6) Components: plastic case, 2pcs AA batteries, wick with light sensor, speaker and electronic circuit.

-nbsp;

Features:Operator can record his own message then install it to greeting card. The recorded message will be activated once open the card.
1) Voice duration: 6-30seconds ;
2) Component: PCB, 2 buttons, a speaker, MIC, LED indicator and 3 batteries.
3) Dimension: 60 x 31.5 x 5mm or 45 x 45 x 5mm
Operating Guide:
1) Speak to Microphone as soon as press and hold the REC button for recording message. At this moment, the LED light will be in red.
2) Release REC button when the LED light extinguishes.
3) Press the PLAY button for play the message recorded just now.
4) Repeat the above steps for recording new message.

-nbsp;

Features:Operator can record his own message and write something on the front then mail to his friend or family.
1) Voice Duration: 6 -20 seconds are available
2) Component: Paper Card, Foam Board, Voice Chip, Speaker, MIC, Buttons and Battery.
3) Voice recording and playing ;
4) On-off switch beside the card.
5) Record up to 200 -ndash;300 times base on the battery storage and voice duration;
6) Dimension: L 155 x W 112 x T 5mm
Operating Guide:
1) Switch to ON;
2) Press and hold down REC button;
3) Speak to MIC;
4) Switch to OFF;
5) Press PLAY for playing message.

-nbsp;

Features:Operator can insert his own picture in the pocket on back and write something on the front. Moreover he can record his own message then mail to his friend or family.
1) Voice Duration: 6 -30 seconds are available
2) Component: Paper Card, Foam Board, Voice Chip, Speaker and Battery.
3) Voice recording and playing
4) Record up to 200 -ndash;300 times base on the battery storage and voice duration;
5) Dimension: L75 x W 75 x T 5mm
6) Dimension of REC and PLAY buttons is 15mm.-nbsp; RoSH standard
7) Both Front and Rear surfaces are printed on glossy white card to enable dry-wipe markers to be used.
8) Press and hold REC to record. Push PLAY button to play message.
Operating Guide:
1) Switch to ON;
2) Press and hold down REC button;
3) Speak to MIC;
4) Switch to OFF;
5) Press PLAY for playing message.

-nbsp;

Features:Talking Photo Albums with 100 minutes of recording time with it's unique SD Card Memory.
Each of the 20 pages will hold a single 5x7-quot; Photo or Image, (125x175mm).
Record a separate voice message on each page using the built-in microphone.
Total recording time: 100 minutes, across 20 pages, (e.g. 5 minutes per page)
Each page has an individual PLAY/STOP Button.
Earphone Socket for personal listening, (3.5mm Phono).
Size: 225 x 175 x 35mm Approx. 20 pages in a 'flip style' Album.
Built-in Speaker with Volume Control. Insert a 6x4-quot; Photo into the Front Cover.
Batteries are included and replaceable: 3 x AAA.
Recordings are preserved forever, even when batteries are replaced.
Removable SD Card memory storage. 1GB SD Card supplied FREE.
UNIQUE FEATURE: Voice recordings are stored on the removable SD Card. This unique feature will allow you to save and transfer your recordings from your Album to your PC. You can also pre-record each page with audio by loading the SD Card with sound files from your PC.


-nbsp;

Features:Operator can record her own voice message by pressing REC button. Then touch the glass to listen the recorded message. The retention of recorded message could be up to 50 years even change batteries.
1) Voice duration: 10-second and 20-second
2) GR521 is for holding 4-rdquo; x 6-rdquo; (10 x 15cm) picture
3) Component: Wood photo frame, electronic elements, batteries.
4) The frame is replaceable. Leather frame or Poly frame.
Operating Guide:
1)Slide the On-Off switch to be ON position;
2) Press down and hold REC button, the LED is on ynchronously.
3) Speak to MIC till LED extinguishes.
4) Release REC button;
5) Turn to front.
6) Touch the glass surface to get the recorded message.

-nbsp;

Features:The recorded messages can be preserved as five paragraphs and activated by pressing each PLAY button individually.
1)-nbsp; Each recording can up to 18 seconds and total duration will be 90 seconds.-nbsp;
2)-nbsp; Flash memory preserves the digital recordings forever even if change batteries.
3)-nbsp; 3pcs 1.5volt cells are required;
4)-nbsp; Dimension: 85 x54x5mm;
5)-nbsp; Voice retention is over 100years
Operating Guide:
1) Slide power switch to -quot;ON-quot; position.
2) Press and hold -quot;P1-quot; and -quot;REC-quot; buttons synchronousely.
3) LED indicator upon -ldquo;P1-rdquo; is on.
4)Speak to MIC to record and preserve the message on -ldquo;P1-rdquo; .
5) Release the two buttons while recording end (LED indicator extinguishes).
6) The LED indicator upon P1 button will be blink until pressing -quot;P1-quot; button.
7) Press -quot;P1-quot; to playback the recorded message on -ldquo;P1-rdquo;.
Remark:
1. -quot;P1-quot; button means anyone button of father, mother, boy1, boy2 and girl.
2. It is necessary to slide to -quot;OFF-quot; position in order to keep power if don't use the recorder for long time as well as in transportation

-nbsp;

-nbsp;

Features:Voice recording and playing；Voice duration: 10 seconds, 20 seconds and 30 seconds
Record up to 3000 seconds continued working. Dimension: D35mm-times;H10.5mm
Operating Guide:
1) Using pointed article to press down and hold [REC] button.
2) Speak to MIC as soon as LED is on
3) Release REC button once LED is off that means recording memory is full.
4) Press Play button to get the recorded voice.

-nbsp;

Features:This item is suitable for advertising, door bell and promotion activities. The recorded message will play once someone passes through.
1) Component: plastic case, a speaker, MIC, LED indicator, motion sensor and 3 AA batteries
2) Voice duration: GR426-1 is 10 seconds and GR426-2 is 20 seconds duration. GR426-3 is 30 seconds duration.
3) Sensing distance: 1M-3M
4) Dimension: L96 x W62x H26mm ；
5) Standby current -lt; 20uA
Operating Guide:
1) Slide the On-Off switch to be ON position；
2) Press and hold REC button
3) Speak to MIC once hear -ldquo;Bi-rdquo; sound；
4) Release REC button till hear -ldquo;Bi Bi-rdquo; sound
5) The recorded message will be activated when someone pass by in available distance.

-nbsp;

Features:It is very thin (5mm in thickness).
1) Sound Duration: 10s-60s (GR425-1 for 10s, GR425-2 for 20s-hellip;GR425-6 is for 60s voice recording time).
2) Batteries are replaceable.
3) 3pcs 1.5volt cells are required ；
4) Dimension: 85 x54x5mm
5) Magnet piece is installed on back to be possible stuck to a refrigerator or other iron surface.
Operating Guide:
1) Slide the power switch to REC (ON) position
2) Press and hold PLAY button, meanwhile LED will be on
3) Speak to MIC till LED extinguishes that means the recording memory is full
4) Slide the power switch to PLAY (OFF) position
5) Press PLAY button to get the recorded message

-nbsp;

Features:It is possible to record your message by press the REC on toy-rsquo;s hand. Then press PLAY button on other hand to get the recorded message.
1) Component: plastic case, 2 buttons, 4 x 20cm wire, MIC, 3x1.5vDC cells, a speaker.
2) Voice duration: TE7600-1 is 10 seconds and TE7600-2 is 20 seconds duration. TE7600-3 is 30 seconds duration. TE7600-4 is 40 seconds.
3) Dimension: 1 3/4-quot; diameter x 3/4-quot; high (D45mm x H19mm)
Operating Guide:
1) Press and hold the REC button (in the left hand of toy) and big button (in the center of case) together.
2) Speak to the toy heart loudly to record the message while hear -ldquo;Bi-rdquo; sound.
3) Release the REC and big buttons till hear -ldquo;Bi Bi-rdquo; sound which means the recording memory is full.
4) Press blue PLAY that is located in right hand of toy to get the recorded message.

-nbsp;

It can be stuck on book as a music or message pat
1)-nbsp; Push each of 16 active buttons on message pat to play one individual message
2)-nbsp; Dimension: 220 x 60 x13mm
3)-nbsp; On-Off switch beside
4)-nbsp; Voice duration: It will be decided by the customized sound file. As longer as-nbsp; the Buyer-rsquo;s need. For example 160s to 660s
5)-nbsp; Match EN71 and ASTM standard as well as CE request.
6)-nbsp; Use 2 AAA batteries
7)-nbsp; Component: plastic case, sound chip, PCB, speaker, sticker and batteries

-nbsp;It is very thin (5mm in thickness).
1)-nbsp; Sound Duration: 3s-240s
2)-nbsp; Batteries are replaceable.
3)-nbsp; 3pcs 1.5volt cells are required
4)-nbsp; Dimension: 85 x54x5mm
5)-nbsp; ON-OFF switch beside
6)-nbsp; Batteries are replaceable when draw out the battery housing.
7)-nbsp; The back is plat. It can be stuck on any surface with a double adhesive sticker.

1)-nbsp; Sound Duration: 3s-120s
2)-nbsp; Batteries are replaceable.
3)-nbsp; 3pcs 1.5volt cell batteries are required
4)-nbsp; Dimension: 85 x54x5mm
5)-nbsp; ON-OFF switch beside
6)-nbsp; Batteries are replaceable when draw out the battery housing.
7)-nbsp; There is a metal clap on back. It is easy to be fixed on book, maggazine or other objects.

1)-nbsp; A good quality music is prerecord.
2) Music is activated by blaze or bright light
3) The demension: D102 x H20mm
4) Optional melodies: Danny Boy; My Heart Will Go On; Silent Night; Unchained Melody; You Light Up My Life or OEM music. 30s - 300s are available.
5) The color of plastic case could be customized. The buyer has to provide the preferred color no# in Paton Color system.
6) Components: plastic case, 2pcs AA batteries, wick with light sensor, speaker and electronic circuit.

1). Very cute and popular cartoon appearance
2).High-spaced USB download, very convenient
3).High-quality sound generator
4).Memory capacity up to 1GB
5).Menu management, easy to operate